Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 48 / 473

Operation Manual
34
4.3.3.2 PTZ Function
Select the PTZ function from the drop-down list to call the corresponding functions, including Scan,
Preset, Tour, Pattern, Pan, Go to, Assistant and Light Wiper. See Figure 4-22. For details, see Table 4-6.
Before calling PTZ function, see "4.3.2 Configuring PTZ Function" to configure PTZ function.
●
If an external PTZ is connected to the camera, the configurations are valid only when the
corresponding functions are available on the external PTZ.
●
The range of PTZ function (such as preset and tour) depends on the PTZ protocol.
Figure 4-22 PTZ function
Table 4-6 Description of PTZ function
Parameter Description
Scan
Set the scan number and click
Start
, the camera moves horizontally at a
certain speed between the set left and right limit. Click Stop to stop
scanning.
Preset
Set the preset number and click Go to , the camera quickly positions the
corresponding preset.
Tour
Set the tour number and click
Start
, the camera moves in the order of the
selected presets. Click Stop to stop touring.
Pattern
Set the pattern number and click Start , the camera moves continuously
according to the operation recording. Click Stop to stop patterning.
Operation recording includes the information of manual operation, focus
and zoom.
Pan
Click
Start
, and the camera rotates 360° at a certain speed in horizontal
direction.
Go to
Set the horizontal angle, vertical angle, and zoom. Click
Go to
to position
a certain point accurately.
Assistant
Set the assistant number and click Aux On to enable the corresponding
assistant function, and then you can adjust the camera. Click Aux Off to
disable the corresponding assistant function.
Light/Wiper
Set the light or wiper of the camera.
●
Click Enable to enable light/wiper function.
●
Click Disable to disable light/wiper function.
4.4 Playback
This section introduces playback related functions and operations, including video playback and
picture playback.