Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 311 / 473

Operation Manual
63
Figure 6-53 Schedule
Step 2 Press and drag the left mouse button on the timeline to set arming periods. Alarms will be
triggered in the period in green on the timeline.
●
Click
Copy
next to a day, and select the days that you want to copy to in the prompt
page, you can copy the configuration to the selected days. Select the Select All check
box to select all days to copy the configuration.
●
You can set 6 periods per day.
Step 3 Click Apply .
Step 4 (Optional) Click Time Plan Table to add a new time plan table.
You can:
●
Double-click the table name to edit it.
●
Click to delete the table as needed.
6.5.1.2.2 Record Linkage
The system can link record channel when an alarm event occurs. After alarm, the system stops
recording after an extended period according to the
Post-Record setting.
Prerequisites
●
After the corresponding alarm type ( Normal , Motion , or Alarm ) is enabled, the record channel
links recording. For details, see "10.3 Setting Record Plan".
●
Enable auto record mode, the record linkage will take effect. For details, see "10.2 Setting Record
Control".
Setting Record Linkage
On the Alarm page, click to enable record linkage, select the channel as needed, and set
Post-Record to set alarm linkage and record delay.
After
Post-Record
is configured, alarm recording continues for an extended period after the alarm