Dahua Technology IPC-HDW5842T-ZE, Operation Manual

Page: 397 / 473

Operation Manual
149
◇
Mismatch Attributes Alarm
: When the target's properties are not compliant
with the configured properties, an alarm will be triggered, and the system
performs an alarm linkage.
Step 8 Set arming periods and alarm linkage action. For details, see "6.5.1.2 Alarm Linkage".
Step 9 Click Apply .
To view alarm information on the alarm subscription tab, you need to subscribe relevant
alarm event. For details, see "6.5.1.3.2 Subscribing Alarm Information".
8.10 Setting Heat Map
Detect the distribution of dynamically moving objects in the target area within a certain period and
displays the distribution on a heat map. Color varies from blue to red. The lowest heating value is in
blue, and the highest heating value is in red.
Background Information
When mirroring occurs on the camera or the viewing angle changes, original data on the heat map
will be cleared.
Procedure
Step 1 Select AI > Smart Plan
Step 2 Click next to
Heat Map
, and then click
Next
.
Step 3 Select the Enable check box, and then the heat map function is enabled.
Figure 8-46 Heat Map
Step 4 Draw detection area and exclusion area.
●
Click to draw a detection area on the image. Right-click to finish drawing.
●
Click to draw an exclusion area on the image. Right-click to finish drawing.
●
Click to clear the existing detection area or exclusion area.
Step 5 Set arming periods and alarm linkage action. For details, see "6.5.1.2 Alarm Linkage".
Step 6 Click Apply .
8.11 Setting ANPR
When a motor vehicle triggers the rule line in the detection area, it will capture the license plate and
report the attributes of the motor vehicle.