Daedong KIOTI PX1053 Manual Download Page 84

Page: 84 / 256

PX9530 / PX1053 / PX1153 / PX1303

when driving on a public road

or at a high speed, never use

only one brake pedal. The

tractor can roll over.
while the brake(one side) lamp

is not illuminated, the brake ped-

als are not interlocked. Make

sure to set the pedal interlock

to the "lock" position in a nor-

mal condition.

•

IMPORTANT

This comes on when the brake pedal

interlock for two brake pedals is un-

locked.

The switch is used to set the PTO

rpm. With the PTO cruise button set

in the ON position, pressing the SET

(-) button turns on this lamp.

CRuISE PTO lAMP

CRUISE

PTO

TG2O485A

1. DeSOx is provided to burn sulfur

contained in fuel and engine oil

regularly using post-injection so

that sulfur does not affect the SCR

catalyst, deteriorating nitrogen ox-

ide purification efficiency.

2. This process is repeated at an in-

terval of approx. 200 hours as pas-

sive DeSOx or active DeSOx, and

it takes approx. 20 minutes.

FORCED DeSOx wARNING

lAMP

TG2O486A

TG120-수출향-US-04.indd 18

2017-10-20 오후 5:59:41

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands