Daedong KIOTI PX1053 Manual Download Page 234

Page: 234 / 256

px9530 / px1053 / px1153 / px1303

TURN SIGNAL LAMP (FRONT)

(1) Turn signal lamp (frT)

(2) Turn signal lamp (frT) Bulb

1. remove the cap and unscrew the

mounting bolts to remove the front

turn signal lamp assembly.

2. Turn the bulb body counterclock-

wise to remove it.

3. remove the bulb by pressing it

down lightly and install a new bulb.

fit the socket to the grooves and

turn it clockwise.

Tg2o739B

a40o718a

LICENSE PLATE LAMP

(1) license plate lamp

(2) Mounting Bolt

(3) license plate lamp Bulb

1. remove the cover and unscrew

the bolt. Then, turn the bulb while

pressing it down lightly to remove

it. install a new bulb.

Do not touch the bulb if it is

still illuminated or right after it

is turned off. you can be burnt

by the hot bulb.

•

CAUTION

For some bulbs which require

delicate handling or work pro

cess, contact your local kIOTI

Dealer.
Do not touch the illuminating

glass part of the halogen bulb.

The bulb life can be shortened

by finger prints, dust and

moisture, or the bulb even can

be broken. Clean it with soft

cloth.
The halogen bulb contains

compressed gas, so it can ex

plode if dropping or scratch

ing it. Therefore, never use a

bulb if it is scratched or was

dropped.
when separating the cover

by prying it off with a screw

driver, be careful not to dam-

age it.

•

CAUTION

TG120-수출향-US-07.indd 50

2017-10-26 오후 1:20:57

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands