Daedong KIOTI PX1053 Manual Download

Page: 32 / 256

pX9530 / pX1053 / pX1153 / pX1303

3. the loader can be turned over if a

draw-bar is improperly loaded.

make sure to use a draw-bar prop-

er for the 3-point hitch lower link.

otherwise, it may lead to an injury

or even death.

H11O104a

4 never carry a big object with the

loader unless a proper implement

is attached. keep a carried object

low during driving. otherwise,

it may lead to an injury or even

death.

H11O105a

5. When attaching or detaching the

loader, fix all parts which are con

nected to the bucket and boom.

the bucket or boom can be acci-

dentally dropped down, leading to

an injury or even death.

H11O106a

TG120-수출향-US-01.indd 20

2017-09-14 오후 6:39:15

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands