Daedong KIOTI PX1053 Manual Download Page 39

Page: 39 / 256

safetY pre cautions

(6) part no. : t4960-52381

T4960-5238 1

1. Make sure to follow the handling precautions specified in the

operating manual and safety decals.

2. Keep the safety instructions in the operating manual and safety

decals.

3. Never modify the machine without approval.

4. Never use an implement with the capacity other than the specified.

5. The owner has the sole responsibility for any problem occurred

by not following the above instruction.

1. The owner has the sole responsibility for any problem occurred by

not following the above instruction.

2. Never sleep in the cabin with the A/C ON. You can be suffocated

to death.

1. This vehicle is equipped with the turbocharged engine. Avoid rapid

turn, acceleration or start-off right after the engine is started. Also,

idle the engine for approx. 1 minute before operation.

2. Also, idle the engine for approx. 1 minute before stopping the

engine.

WARNING

CAUTION

(8) part no. : t4930-52341

1. For the tractor equipped with the ROPS, make

sure to wear the seat belt all the time. For the

tractor not equipped with the ROPS, never wear

the seat belt.

2. When driving the tractor equipped with the ROPS,

make sure to wear the seat belt. If the tractor rolls

over, hold the steering wheel firmly and never

jump out of the tractor.

WARNING

(7) part no. : t4930-52321

Knob Button

Avoid flames and sparks.

STOP engine while refueling

ONLY use diesel.

(9) part no. : t4930-52481

TG120-수출향-US-01.indd 27

2017-09-14 오후 6:39:16

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands