Daedong KIOTI PX1053, Manual

Page: 143 / 256

5
opERATIoN
5
-
5
8. Insert the key into the key switch
and turn it "oN". Maintain it until
the preheat lamp is turned off.
(1) key Switch (A) off (B) Acc
(c) oN (d) Heat (E) Start
TG1O403A
When the ignition switch is set in the
"oN" position, the engine coolant is
automatically preheated. As soon as
the preheat indicator goes off, start
the engine.
After the engine is started, post-
heating is performed for up to 60
seconds (depending on the coolant
temperature) with the key in the "oN"
position.
The post-heating is a function to
keep the preheating function activat-
ed for approx. 15 seconds after the
engine is started in order to enhance
the engine combustion performance
and reduce harmful emissions right
after engine start.
10. Warm up the engine for 3 to 4
minutes (10 minutes in winter)
after releasing the clutch pedal.
9. When the engine is started, re-
lease the key. Then, the key is
automatically turned back to the
"oN" position.
Do not turn the key switch to
the "start" position while the
engine is running.
•
WARNING
Never operate the start motor
for 10 consecutive seconds
as it consumes a lot of battery
power. If the engine cannot
be started within 10 seconds,
wait for 30 seconds and try
again.
Never try to crank while the
flywheel is turning.
•
•
WARNING
OPERATING PRINCIPlE Of PREHEAT sYsTEm
TG120-수출향-US-05.indd 5 2017-09-14 오후 6:57:41