Daedong KIOTI PX1053, Manual

Page: 140 / 256

pX9530 / pX1053 / pX1153 / pX1303
5
-
It is a good practice to know the con-
dition of your tractor before you start
it. You should do routine check be-
fore each use.
for detailed information, refer to
"Maintenance schedule chart" in
chapter 7.
PRE-OPERATION CHECK
CHECK ITEm
TIPs fOR bREAKING-IN
1. Start the engine and idle the en-
gine at a low speed for 3 to 4 min-
utes in advance.
2. Increase the idling time in cold
weather.
3. do not drive the tractor at the max-
imum speed on a road.
4. Never apply excessive load during
work.
5. Idle the engine at a low speed for
2 to 3 minutes before stopping it.
driving a new tractor at a high speed
or under heavy load can affect its du-
rability.
Make sure to run the tractor at the
proper work load and speed for the
initial operation of 10 to 20 hours.
INITIAl OPERATION
•
Walk around inspection.
• Engine oil level.
• Urea level inspection
• Transmission oil level
.
• coolant level.
•
clean the front grill and radiator
screen.
• Air cleaner element.
• Brake pedal free play.
• All dash gauges and indicators.
• Head lights, tail lights, and working
lights.
•
Accessible wiring harness for any
damage.
• Seat belt and
ROPs
for damage.
• All "dANGER" and "WARNING"
decals.
• fuel level.
• Tire pressure and wheel bolt tight-
ening condition.
•
3-point hitch and secure pins.
Park the tractor on the level
ground, stop the engine, and
apply the parking brake before
checking or repairing it.
Refer to "DAIlY CHECKING
ITEm" in the section 7 "mAIN-
TENANCE" for pre-operation
check.
be sure to read and under-
stand the information titled as
"DANGER", "WARNING", and
"CAUTION" thoroughly for the
safe operation.
•
•
CAUTION
TG120-수출향-US-05.indd 2 2017-09-14 오후 6:57:38