Daedong KIOTI PX1053 Manual Download Page 157

Page: 157 / 256

opERATIoN

If stopping the engine while

driving, the steering perfor-

mance can become deterio-

rated due to loss of hydraulic

power, resulting in a severe

accident. Never stop the en-

gine while driving.

Always grip the steering wheel

using both hands while driving.

•

WARNING

▶

POsITION CONTROl

1. The position control lever is used

to lift or lower the lifting arm (lower

link) of the 3-point hitch.

2. pushing the lever forward lowers

the lower link while pulling the le-

ver backward lifts the lower link.

3-POINT HITCH CONTROl sYsTEm

(1) position control lever

(2) lock Bolt

3. The height of the lower link is pre-

cisely controlled proportional to the

position of the lever.

4. The lower link is lifted by the hy-

draulic energy of the tractor while

it is lowered by potential energy

of its own weight. Therefore, the

implement cannot be lowered by

the hydraulic pressure.

5. Therefore, the implement attached

to the lower link may be lifted by

protrusion on the ground when it is

lowered to the ground. It is called

as "floating".

TG2O422B

TG120-수출향-US-05.indd 19

2017-09-14 오후 6:57:50

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands