Daedong KIOTI PX1053 Manual Download Page 92

Page: 92 / 256

PX9530 / PX1053 / PX1153 / PX1303

Operating the shuttle shift

lever at a high speed can be

very dangerous. Make sure to

reduce the driving speed suf-

ficiently before operating the

lever.

•

CAuTION

Four speeds can be selected by

moving this main shift lever in

This functions as the foot clutch ped-

al. When pressing this button during

driving, the main shift lever can be

operated. (Without depressing the

foot clutch pedal)

hAND CluTCh

(1) Main Shift Lever (A) Hand Clutch

(B) High Speed Selection Switch

MAIN ShIFT lEvER

It is possible to operate the shut-

tle shift lever at a high speed.

When pulling the lever backward

during forward driving, reverse

driving is selected as soon as

the machine speed is decreased

down to 9 km/h.
When placing the shuttle shift le-

ver in the neutral position, power

is cut off, resulting in decrease of

the machine speed and eventu-

ally stopping of the machine.

•

You can switch between the high

driving speed and low driving speed

by pressing this button during driv-

ing. The current shifting status can

be identified through the HIGH/LOW

lamp on the instrument cluster. (When

the engine is started, the LOW speed

is automatically selected.)

hIGh / lOw buTTON (POwER ShuTTlE)

TG2O409d

"H"shaped path. You can shift this

lever from the 1st to 4th gears even

when the tractor body is moving by

disengaging the clutch during driving

as these gears are synchromeshed.

In total, 16 forward driving speeds

and 16 reverse driving speeds are

provided by combination of the main

shift lever (4 speeds), range shift le-

ver (4 speeds) and shuttle shift lever.

MANuAl

POwER ShuTTlE

TG120-수출향-US-04.indd 26

2017-10-20 오후 5:59:53

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands