Daedong KIOTI PX1053 Manual Download Page 148

Page: 148 / 256

pX9530 / pX1053 / pX1153 / pX1303

1. Adjust the seat and fasten the seat

belt.

OPERATING THE TRACTOR

HOW TO DRIvE

(1) Seat

(2) Seat Adjustment lever

(3) Seat Adjuster (fRT/RR)

(4) Seat Adjustment knob (cushion Weight)

Check if the seat is securely

locked after the seat adjust-

ment.

Do not adjust the seat while

driving. The seat may move

suddenly causing the loss of

control of the tractor.

•

WARNING

TG2O504B

H11o511A

(1) Seat Belt

2. Wear the seat belt.

Always wear the seat belt

when cap is installed.

If the seat belt is worn across

the abdomen or waist, not the

hips, an injury can occur in

case of an accident or impact.

Do not wear the seat belt if

the ROPs is not installed or

folded.

•
•

•

WARNING

Adjust the steering wheel accord-

ing to the driver's physique.

Do not adjust the tilt angle of

steering wheel while driving.

You could lose the handle of

your tractor, causing an acci-

dent.

•

WARNING

(1) Handle

(2) Tilt pedal

(A) lowering

(B) lifting

TG1O485A

TG120-수출향-US-05.indd 10

2017-09-14 오후 6:57:44

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands