Daedong KIOTI PX1053 Manual Download Page 221

Page: 221 / 256

MainTenance

Take the filter off before

washing the cab. If the cab is

washed and the filter has not

been demounted, take care to

prevent the jet of water from

splashing on to the protective

grille. otherwise your cab's

filter will be irreparably dam

aged.

•

WARNING

Only install carbon filters sup

plied sealed when delivered:

comply with the operating

instructions on the container

and enclosed in the filter pack

age.

Carefully comply with the

operating instructions on the

filter packages or labels. Re

place the filters at the intervals

specified by the filter manu

facturer.

Contact your dealer if specific

filters against chemicals must

be used.

•

CAUTION

Always wear the right sort of

personal protective equipment

to protect against the harmful

products used.

•

WARNING

flUsh COOlING sysTEM AND

ChANGING COOlANT(AJ)

(1) Drain cock

1. stop the engine and let it cool.
2. To drain the coolant, open the radi-

ator drain cock and remove radia-

tor cap. The radiator cap must be

removed to completely drain the

coolant.

3. after all coolant is drained, close

the drain cock.

4. fill with clean water and cooling

system cleaner.

5. follow the cleaner manufacture’s

instruction.

Tg1o754a

TG120-수출향-US-07.indd 37

2017-10-26 오후 1:20:51

Summary of Contents for KIOTI PX1053

































































































































































































































































Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands

Daedong KIOTI PX1053, Manual

Search results

Summary of Contents for KIOTI PX1053

Reviews:

Related manuals for KIOTI PX1053

Brands by name

Popular brands