Daedong EX50-SA Manual Download Page 43

Page: 43 / 196

IDENTIFICATION & INTRODUCTION OF WARRANTY



Identification No.

To be filled in by purchaser.



Engine Serial No.



Transmission Serial No.



Date of Purchase

H11O204A

Various oils and fluids are used in this

tractor for operation, lubrication, cool

ing, and anti-corrosion of various parts.
If oil or fluid is insufficient, contami

nated or degraded, it can cause poor

performance, incorrect operation,

and seized parts of the tractor, lead

ing to malfunctions.
Regularly add or change the fluid

specified on the right to keep the

tractor in perfect condition.

ESSENTIAL REPLACEMENT PART

OILS AND FLUIDS

No.

ITEM

SPECIFICATION

L (U.S.gal.)

EX50

EX5310

EX55

EX5810

Engine oil

API CD grade above

SAE 10W30 or 15W40(above -10

℃

)

7.4 (1.95)

7.7 (2.03)

Transmission

fluid

SAE 15W40 DAEDONG UTF55

Exxonmobil Mobilfluid 424

BP: Tractran UTH Exxonmobil Hy

draulic 560

Shell: Donax TD

52 (13.74)

Grease

SAE multi purpose type grease

A little

Antifreeeze

Fresh clean water with ethylene

glycol (50 : 50)

8.7 (2.30)

TE150 (EX50, EX55)-��-02.indd 3

2019-03-19 �� 2:25:15

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands