Daedong EX50-SA Manual Download Page 156

Page: 156 / 196

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU

1. To drain the used oil, remove the

right and left drain plugs and fill-

ing plug at the front axle case and

drain the oil completely into the oil

pan.

2. After draining, reinstall the drain

plugs.

3. Remove the oil level checking plug

on the left of the front axle.

CHANGING FRONT AXLE CASE OIL(N)

4. Add new oil to the specified level

through the oil filler.

5. Wait at least 15 minutes to allow

the oil flow to the bevel case be-

fore checking the oil level.

6. Add oil as necessary and tighten

the oil filler plugs and oil level

checking plug.

(1) Check Plug

(2) Filling Plug

(3) Drain Plug

Front Axle Oil Capacity

7.0 L (1.85 U.S.gal.)

T46OA19A

(1) Brake Pedal

(2) Push Rod

(3) Lock Nut

(4) Master Cylinder

(A) Free Play

ADJUSTING BRAKE PEDAL(O)

BRAKE PEDAL FREE PLAY

1. Slightly depress the brake pedal

and measure its free play.

2. If the free play is out of the speci-

fication, adjust the length of the

push rod.

3. Tighten the lock nut firmly after ad

justment.

Pedal Free Travel (A)

20~30 mm (0.787 ~ 1.181 in.)

T46OA12A

TE150 (EX50, EX55)-��-07.indd 18

2019-03-19 �� 4:36:25

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Brands by name

Popular brands