Daedong EX50-SA Manual Download Page 33

Page: 33 / 196

SAFETY PRE CAUTIONS

6. Do not allow loader arms or attach-

ment to contact electrical power

lines. Electrocution will cause seri-

ous injury or death.

H11O107A

7. Keep bystanders away. No riders.

H11O108A

IMPLEMENTS AND ATTACH-

MENTS

WARNING

•

Use exclusively front loader

approved by the tractor's man-

ufacturer, with CE mark and

parallelogram type.

•

The installation and modifica-

tion of the tractor must be car-

ried out with the highest tech-

nical standards by specialised

workshops with qualified per-

sonnel. Such workshops must

be able to guarantee and at-

test the risk analysis provided

for in the Machinery Directive

2006/42/EC concerning the

foreseen and predictable use

of the tractor with front loader,

in order to carry out all re-

quired adaptations of the trac-

tor.

•

Use the front loader and all

supplied equipment as pre-

scribed by the loader's opera-

tor manual.

TE150 (EX50, EX55)-��-01.indd 21

2019-03-19 �� 2:45:46

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands