Daedong EX50-SA Manual Download Page 141

Page: 141 / 196

MAINTENANCE

MAINTENANCE CHECK LIST

DAILY CHECK ITEM

※

For detailed information about maintenance codes, refer to the corresponding section in each chapter.

SERVICE SCHEDULE

MAINTENANCE

CODES

ITEM

SERVICE REQUIRED

Engine Oil

Check the oil level and add as needed. Do not overfill.

Hydraulic (Trans / Diff.) Fluid Check level and add as needed.

Engine Air Filter and Air

Intake System

Check restriction indicator. (If equipped)

Check for leaks and damaged components. Do not use compressed air to clean

elements.

Engine Cooling System

Clean debris from oil cooler, radiator screen and grills. Check coolant level cold,

add premixed coolant as needed.

F, G, AC

Seat Belt

Check the condition of seat belt and mounting hardware. Repair or replace as

needed.

Tires

Check for wear, damaged tires and ensure for proper sized tires and correct air

pressure.

Parking Brake

Check operation and adjust if required.

Clean Pedals

Clean brake pedals, travel control pedal, clutch pedal and footrest area.

General Items

Check for loose or broken parts, damaged operator cab, instrument operation,

loose wheel nuts / bolts, oil leaks and damaged or missing signs. (Decals)

Q, AG, AH, AM

PTO

Inspect the splines. Replaced damaged or missing shields and guards.

Three-point Linkage

Check operation and condition of pins, links and bars.

Loader (If Equipped)

Check mounting hardware for loose or broken parts.

TE150 (EX50, EX55)-��-07.indd 3

2019-03-19 �� 4:36:21

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands