Daedong EX50-SA Manual Download Page 79

Page: 79 / 196

DESCRIPTION OF OPERATING SYSTEM

TE5O412A

FOOT THROTTLE

The foot throttle is mainly used

during driving on a road while the

hand throttle lever is mainly used

while working on a field.

(1) Foot Throttle (2) Hand Throttle Lever

•

For heavy load job, such as
front end loader operation,

use low or medium speed of

the range shift lever.

IMPORTANT

•

If the ignition key is turned ON
or the engine is started while de-

pressing the forward or reverse

driving pedal, the CAL lamp

turns on and forward or reverse

driving is disabled for safety.

This restriction is automatical-

ly canceled when keeping the

forward or reverse driving pedal

released for 1 second.

However, if the lamp is still illu-

minated, contact

KIOTI

dealer.

NOTE

HAND THROTTLE LEVER

The hand throttle lever is to control

the engine rpm. The engine accel-

erates to its full speed by pulling the

hand throttle lever ( position) com

pletely out while pushing the lever

(

position) decelerates the en-

gine.
The hand throttle lever is mainly

used while working on a field.

(1) Hand Throttle Lever (2) Foot Throttle

INCREASE

DECREASE

T46O564A

TE150 (EX50, EX55)-��-04.indd 25

2019-03-19 �� 6:58:30

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Brands by name

Popular brands