Daedong EX50-SA Manual Download Page 15

Page: 15 / 196

SAFETY PRE CAUTIONS

16. All persons using the tractor

should have knowledge of its

proper operation and should read

this manual carefully.

17. Never get off the tractor without

setting the parking brake, lower-

ing the implement to the ground

and shutting of the tractor.

18. No alterations should be made to

your

KIOTI

tractor.

12. Never start the engine while

standing on the ground.

13. Only the operator should ride on

the tractor unless a passenger

seat is installed. Keep bystand-

ers away from the tractor while in

operation.

14. When getting on and off the trac-

tor, handholds and step plates

should always be used. This will

help to prevent accidental slips

trips and falls.

15. Be sure to scrape off mud or soil

from your shoes before mounting

the tractor.

T66O103A

T66O104A

T66O105A

9. Never operate this tractor or

any other agricultural equipment

while under the influence of alco

hol, drugs or while fatigued.

10. While working in cooperation

with other tractors always com-

municate your intentions.

11. Do not start your tractor by short-

ing across the starter.

TE150 (EX50, EX55)-��-01.indd 3

2019-03-19 �� 2:45:36

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands