Daedong EX50-SA Manual Download Page 27

Page: 27 / 196

SAFETY PRE CAUTIONS

WHEN USING THE 3-POINT

HITCH

1. Use the 3-point hitch only with

equipment designed for 3-point

hitch usage.

2. When using a 3-point hitch mount-

ed implement, be sure to install the

proper counterbalance weight on

the front of the tractor.

3. When transporting on the road,

set the implement lowering control

in the "LOCK" position to hold the

implement in the raised position.

In order to service your tractor you

must park it on a flat level surface,

set the parking brake, place the gear

shift lever in neutral and stop the en-

gine.
1. Do not smoke while working

around the battery or when refuel-

ing your tractor. Keep all sparks

and flames away from the battery

and fuel tank. The battery presents

an explosive hazard because it

gives off hydrogen and oxygen etc.

especially when recharging.

SAFETY PRECAUTIONS

DURING SERVICING

T66O124A

(1) 3-point hitch lowering speed knob

(A) “FAST”

(B) “SLOW”

T46O123A

2. Allow the tractor time to cool off

before servicing any part that may

have become hot while the tractor

was running.

3. You must always stop the engine

before refueling the tractor. Avoid

overfilling the tractor or spilling the

fuel.

4. Before jump starting a dead bat-

tery, read and follow all of the in-

structions. (Refer to the page 5~9)

5. It is recommended to keep a first

aid kit and fire extinguisher handy

at all times.

T66O125A

TE150 (EX50, EX55)-��-01.indd 15

2019-03-19 �� 2:45:43

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands