Daedong EX50-SA Manual Download Page 108

Page: 108 / 196

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU

(1) Grip Bolt

(2) Set Pin

(3) Clip Pin

3. Align pin holes, insert set pin and

secure them with the clip pin.

4. Fix the ROPS with the grip bolt.

T46O516A

CAUTION

To avoid accidents:

•

Make sure that pins are proper-
ly installed and secured.

PARKING

IMPORTANT

•

ROPS (Roll Over Protective
Structure), sun canopy or

cabin are not a FOPS (Falling

Object Protective Structure).

It never can protect the riders

against falling objects. Avoid

driving the vehicle into a dan-

gerous area such as falling

rocks zone. Otherwise, it may

lead to a serious injury.

(1) Parking Brake Lever (2) Brake Pedals

(3) Interlock

(4) Block

(A) Depressing

(B) Push Down

111

TE5O419A

TE150 (EX50, EX55)-��-05.indd 16

2019-03-19 �� 7:03:17

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands