Daedong EX50-SA Manual Download Page 103

Page: 103 / 196

OPERATION

1. Adjust the seat and fasten the seat

belt.

OPERATING THE TRACTOR

HOW TO DRIVE



Check if the seat is securely

locked after the seat adjust-

ment.



Do not adjust the seat while

driving. The seat may move

suddenly causing the loss of

control of the tractor.

WARNING

(1) Seat Belt

2. Wear the seat belt.

H11O511A



Always wear the seat belt when

cap is installed.



If the seat belt is worn across

the abdomen or waist, not the

hips, an injury can occur in

case of an accident or impact.



Do not wear the seat belt if the

ROPS is not installed or folded.

WARNING

H11O510A

(1) Seat (2) Seat Back Adjustment Lever

(3) Seat Adjustment Lever (Cushion Weight)

(4) Seat Height Adjustment Lever

(5) Seat Adjustment Lever (Sliding)

(1) Steering wheel (2) Tilt Pedal

(A) Lowering (B) Lifting

3. Adjust the steering wheel accord-

ing to the driver’s comfort.



Do not adjust the tilt angle of

steering wheel while driving.

You could lose the handle of

your tractor, causing an acc-

ident.

WARNING

TE5O501A

TE150 (EX50, EX55)-��-05.indd 11

2019-03-19 �� 7:03:16

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands