Daedong EX50-SA Manual Download Page 146

Page: 146 / 196

EX50-SA / EX55-SA / EX5310-AU / EX5810-AU

MAINTENANCE CODE

HOW TO OPEN THE HOOD(A)

(1) Opening Knob

(2) Hood

(A) Pull

(1) Hood

1. To open the hood, pull the lever on

the lower right side from the hood

to the side with the front section of

the hood pressed down. Then, the

front of the hood is opened.

2. To close the hood, press down the

front section of the hood until it is

locked into its original position.

3. Do not apply excessive force to

the lever to fix the hood. The hood

can be damaged.

TE5O702A

•

Never open the hood while the

engine is running.

CAUTION

111

TE5O701A

OPENING SIDE COVER (B)

H11O603A

(1) Side Cover

(2) Hook

(A) Pull

1. The side covers (LH/RH) should

be removed in order to access the

engine components.

2. Open the hood and disassemble

the rubber clips fixed on the left

and right of the side covers.

3. Remove each side cover by pulling

it forward gently while lifting it up.

4. When installing them, align their

pins to the groove on the tractor

body and press them down. Then,

fix them with the rubber clips.

TE150 (EX50, EX55)-��-07.indd 8

2019-03-19 �� 4:36:22

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands