Daedong EX50-SA Manual Download Page 125

Page: 125 / 196

3-POINT HITCH IMPLEMENT OPERATION

H11O566A

5. Install the lower link to the imple-

ment and fit the pins.

(1) Lower Link

6. Start the engine and drive back-

ward toward the implement. Then,

the lower link end is inserted to its

original position.

(1) Lower Link End

H11O569A

7. Separate the top link from its brack-

et and turn it to adjust its length so

that it becomes close to the upper

bracket mounting hole of the im-

plement. Then, fit it to the mount

ing hole, insert the lock pins, and

fix it with the snap pin. Remove the

implement support as necessary.

(1) Top Link

(2) Lock Pin

(3) Snap Pin

H11O561A

TE150 (EX50, EX55)-��-06.indd 3

2019-03-19 �� 2:31:30

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands