Daedong EX50-SA Manual Download Page 99

Page: 99 / 196

OPERATION

11. Check to see that all the warning

lamps on the instrument cluster

turn "OFF". If any lamp remains

on, immediately stop the engine

and determine the cause.

(1) Electrical Charge (2) Parking Brake

(3) Glow Plug Indicator

(4) Engine Oil Pressure

T46O558A

2. If the charge warning lamp (3)

does not go off in 4 to 5 seconds

after the engine is properly started,

it means that the battery is not be-

ing charged. Have the charging

system, such as the battery and

alternator, serviced.

3. Refer to "Instrument panel" in

chapter 4 for detailed information

about other indicators and lamps.

CHECKING CHECK LAMPS

1. If the oil pressure warning lamp (2)

does not go off in 4 to 5 seconds

after the engine is properly started,

stop the engine immediately and

check the engine oil level. If the

engine oil level is proper, contact

your local

KIOTI

Dealer.



The engine can be severely

damaged if it is run with the oil

pressure warning lamp ON.

WARNING



If driving the tractor for an ex-

tended period of time with the

charge warning lamp ON, the

battery can be discharged and

the tractor’s electrical system

can be damaged.

WARNING

TE150 (EX50, EX55)-��-05.indd 7

2019-03-19 �� 7:03:15

Summary of Contents for EX50-SA





































































































































































































Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands

Daedong EX50-SA, Manual

Search results

Summary of Contents for EX50-SA

Reviews:

Related manuals for EX50-SA

Brands by name

Popular brands