D-Link DSA-3600, User Manual

Page: 35 / 204

Chapter 4.1 System
29
¾
Default Authentication Option:
Default authentication database/server that is used within the Service
Zone.
¾
Status:
Each service zone can be enabled or disabled.
¾
Details:
Configurable, detailed settings for each Service Zone.
Click the button of
Configure
to configure each Service Zone:
Basic Settings
,
SIP Interface Configuration
,
Authentication Settings
and
Wireless Settings
. The managed AP(s) in the specific service zone will be
shown in this page as well if there are APs set in this service zone.
ƒ
Basic Settings
The system supports three types of DHCP modes,
Disable DHCP Server
,
Enable DHCP server
, and
Enable
DHCP relay
. Each service zone can have its own DHCP setting. Select the radio button of Disable DHCP
Server to disable the built-in DHCP server when clients are assigned static IP addresses. Select the radio button
of Enable DHCP Server to enable the built-in DHCP server. When the Enable DHCP server is chosen, the
system will act as a DHCP server and assign IP addresses to its clients. Select the radio button of Enable DHCP
Relay when a service zone is connected to an external DHCP server. When Enable DHCP Relay is chosen, the
IP addresses of clients will be assigned by the external DHCP server. The system will only relay DHCP
information from the external DHCP server to downstream clients of this service zone.
¾
Service Zone Status:
Each service zone can be enabled or disabled except the default service zone.
¾
Service Zone Name:
The name of service zone can be input here. Service name can accept ‘space’, <,
> and double-quote and etc.
¾
Network Interface:
o
Operation Mode:
The system supports
NAT
mode and
Router
Mode. When NAT mode is chosen,