Chapter 4.3 Access Points
77
4.3.1 List
All of the supported managed APs (such as DWL-2100AP F/W version v2.2, v2.3) under management of the system
will be shown in the list. The list is empty during first setup. The administrator can add supported APs from
Discovery
or the
Adding
tabs. After the APs are added, this list will show the current managed APs including AP
type, AP name, IP Address, MAC Address, Service Zone and Status. The administrator can reboot, enable, disable,
delete the managed APs, or apply template or apply service zone to them by checking the check box in front of each
individual AP or selecting all the APs together by checking the top check box.
Please Note: The supported managed AP may be varied for different DSA-3600 firmware version.
After adding an AP:
Check any AP and click the button below to
Reboot, Enable, Disable, Delete
, and
Apply Template
to the checked
AP.
y
AP Name
The AP name will be shown as hyperlink. Click the hyperlink of each managed AP can have for configurations
about the specific AP. Click the hyperlink of the
AP Name
to have more configurations. There are four kinds of
settings available:
General
,
LAN
,
Wireless LAN
and
Access Control
. Click the hyperlink of each individual
setting to have further configurations.
y
Service Zone
After the AP is added into AP List, the managed AP can be assigned to one or multiple service zone.
y
Status:
Each AP’s status will be shown in this column. Click the hyperlink of the shown status of each managed AP to
see detailed status information about the specific AP, such as System Status, Service Zone Status, Wireless
Status, Access Control Status and Associated Client Status.
The status includes:
(1) Online:
The hyperlink of Online (Enabled) indicates that the AP is currently online and in service; Online
(Disabled) indicates that the AP is currently online but not ready in service.
(2) Offline:
The AP is currently offline; for example: it is displayed as Offline when the power of the AP is off or
the network connection between the AP and the DSA-3600 is down.
(3) Configuring:
It is displayed as Configuring when the newly discovered AP is being added to the list (and
being configured) or new setting is being applied to the AP.
(4) Upgrading:
The AP is undergoing firmware upgrade.
Summary of Contents for DSA-3600
