D-Link DSA-3600 User Manual Download Page 116

Page: 116 / 204

Chapter 4. Web Interface Configuration

110

4.4.6 DDNS

The system provides a convenient dynamic DNS function to translate the IP address of WAN port to a domain name

that helps the administrator memorize and connect to WAN1 port. When the DDNS is enabled, the system will

update the newest IP address regularly to the DNS server if the WAN1 interface is set to Dynamic. These settings

will become effective immediately after clicking

Apply

DDNS:

Dynamic DNS, choose to enable or disable this function.

Provider:

Select the DNS provider.

Host name:

The IP address/domain name of the WAN port.

Username/E-mail:

The register ID (username or e-mail) for the DNS provider.

Password/Key:

The register password for the DNS provider.

Note: The fields with red asterisks are required to be filled in.

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands