D-Link DSA-3600 User Manual Download Page 164

Page: 164 / 204

Appendix D. Certificate Settings for IE6 and IE7

158

Follow the following steps to complete the proxy configuration:

Step 1.

admin

account.

Step 2.

Network

Proxy Server

External Proxy Servers

page. Add the IP address and port number of the

proxy server into

External Proxy Servers

setting. Click

Apply

to save the settings.

Step 3.

Make sure that clients use the same proxy server settings. Please also configure appropriate exceptions

if there is any traffic which is not needed to go through proxy server – for example, there is no need to

use proxy server for the Default Gateway (192.168.1.254).

Note: It is required that the proxy server setting of the clients match with the proxy server setting of the DSA-3600.

Otherwise, users will not be able to get the Login page for authentication via browsers and it will show an error page

in the browser.

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands