D-Link DSA-3600 User Manual Download Page 145

Page: 145 / 204

Chapter 4.6 Tools

139

4.6.3 Backup & Restore

This function is used to backup/restore the DSA-3600 settings. The DSA-3600 can also be restored to the factory

default settings using this function.

Backup System Setting:

Click

Backup

button to save the current system configurations to a backup file on a

local disk of the management console. The backup file keeps the current system settings as well as the local

user accounts information.

Restore System Settings:

Click

Browse

to search for a .db database backup file created by the DSA-3600 and

click

Restore

to restore to the same settings at the time the backup file is created.

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands