D-Link DSA-3600 User Manual Download Page 159

Page: 159 / 204

Appendix B. Console Interface Configuration

153

(2) Change admin password

The username and the default password is “admin” by default, which is similar to the web management

interface. The administrator’s password can be changed. If the password cannot be remembered and the

management interface cannot be accessed from the web or the remote end of the SSH, the console

cable can still be used to connect the console management interface, where the administrator can then

reset the password.

(3) Reload factory default

Choose this option to reset the system configuration to the factory default settings.

(4) Restart the DSA-3600

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands