D-Link DSA-3600 User Manual Download Page 142

Page: 142 / 204

Chapter 4. Web Interface Configuration

136

Back and Exit: During every step of the wizard, if you wish to go back to modify the settings, please click the Back

button to go back to the previous step. Click Exit to leave the Wizard.

Please Note: Login to the web management interface again by using username “admin” and the selected password.

After logged in the web management interface, click System and then click Service Zones to enter the Basic

Settings page. Next, click the Server 1 hyperlink.

The DSA-3600 uses Virtual LAN (VLAN) along with a SSID to separate service zones. At this stage, the system is

ready for use in minimum configuration. The factory default configuration uses tag-based VLAN. The ‘Default’

service zone (with SSID=’dlink’) is enabled and requires no user authentication at this initial stage.

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands