D-Link DSA-3600 User Manual Download Page 32

Page: 32 / 204

Chapter 4. Web Interface Configuration

Assume LAN1, LAN2, LAN3 will be used by Default service zone for internal staff while LAN4 is to be assigned

to another service zone for external users only. In the above mentioned page, click

LAN4

’s drop-down menu to

select the desired second zone such as ‘SZ1’ for LAN4 (select only enabled service zones). Click

Apply

and

reboot the system.

In tag-based mode, each LAN port can serve traffic from any service zone because VLAN tags carried in

message frame will not be modified. In port-based mode, each LAN port can only service traffic of one service

zone, where all messages through the LAN port will be re-tagged with the tag assigned to the port. Compare

Figure-4.1.5a and Figure-4.1.5b to see the differences.

Figure-4.1.5a: An example using Tag-Based service zones

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands