D-Link DSA-3600 User Manual Download Page 188

Page: 188 / 204

Appendix H. IPSec VPN

182

c. There are some cases of Windows messages by which DSA-3600 will hint current user to:

(1)

Close the Windows Internet Explorer,

(2)

Click “logout” button on “login success” page,

(3)

Click “back” or “refresh” of the same Internet Explorer,

(4)

Enter new URL in the same Internet Explorer,

(5)

Open a URL from the other application (e.g. e-mail of Outlook) that occupies this existing Internet

Explorer.

All these will cause the termination of IPSec VPN tunneling if the user chooses to click “Yes”.

The user

has to log in again to regain the network access.

Suggestion: Click “Cancel” if you do not intend to stop the IPSec VPN connection yet.

6. Non-supported OS and Browser

Currently, Windows Internet Explorer is the only browser supported by DSA-3600.Windows XP and Windows

2000 are the only two supported OS along with this release.

Summary of Contents for DSA-3600













































































































































































































Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands

D-Link DSA-3600, User Manual

Search results

Summary of Contents for DSA-3600

Reviews:

Related manuals for DSA-3600

Brands by name

Popular brands