DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Keep Alive
Move the switch to the right if you want the router to
keep you
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval
and
LCP fails
fields are available. Specify the
required values.
Dial on demand
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the
Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
PPP IP extension
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
PPP debug
Move the switch to the right if you want to log
all data on PPP
connection debugging.
Figure 81. The page for creating a new
PPPoE
Pv6
connection. The
IPv6
section.
Parameter
Description
IPv6
Get IPv6
Select a method for IPv6 address assignment from the drop-down
list or leave the
Automatically
value.
Gateway by SLAAC
Move the switch to the right to automatically assign the IPv6
gateway address with help of SLAAC (
Stateless Address
Autoconfiguration
).
Page
100
of 236
