DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
To create a new tunnel, click the
ADD
button (
) in the
Tunnels
section.
!
Setting for both devices which establish the tunnel should be the same.
Figure 153. The page for adding an IPsec tunnel. The
General Settings
section.
You can specify the following parameters:
Parameter
Description
General Settings
IP version
An IP version.
Dynamic IPsec
Move the switch to the right to allow a remote host with any public IP
address to connect to the router via IPsec protocol. Such a setting can
be specified for one tunnel only. Connection requests via this tunnel
can be sent by a remote host only.
Remote host
A remote subnet VPN gateway IP address. The field is available if the
Dynamic IPsec
switch is moved to the left.
Page
189
of 236
