DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Access Point or Repeater
In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the
Device mode
page, from the
Connection method
list, select the
Wired
connection
value. Then from the
Work mode
list select the
Access point
value. In this mode
you can change the LAN IP address, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The
Access point
mode.
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the
Device mode
page, from the
Connection method
list, select the
Wi-Fi
value.
Then from the
Work mode
list select the
Repeater
value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network, and set your own password for access to the web-based interface of the device.
Figure 37. Selecting an operation mode. The
Repeater
mode.
Page
48
of 236
