DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Keep Alive
Move the switch to the right if you want the router to
keep you
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval
and
LCP fails
fields are available. Specify the
required values.
Dial on demand
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the
Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
PPP IP extension
This option is used by some ISPs. Contact your ISP to clarify if this
option needs to be enabled. If it is required, move the switch to the
right.
PPP debug
Move the switch to the right if you want to log
all data on PPP
connection debugging.
When all needed settings are configured, click the
APPLY
button. In the simplified mode, after
clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), click the
CREATE
CONNECTION
button. On the page displayed, specify the parameters for the connection of the
Dynamic IPv4 or Static IPv4 type and click the
APPLY
button.
If you do not need to create an additional connection, click the
SKIP
button. In this case, the
Connections Setup / WAN
page opens.
Page
90
of 236
