DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
UPnP IGD
On the
Advanced / UPnP
IGD
page, you can enable the UPnP IGD protocol. The router uses the
UPnP IGD protocol for automatic configuration of its parameters for network applications requiring
an incoming connection to the router.
Figure 147. The
Advanced / UPnP IGD
page.
If you want to manually specify all parameters needed for network applications, click the
DISABLE
button. Then go to the
Firewall / Virtual Servers
page and specify needed settings.
If you want to enable the UPnP IGD protocol in the router, click the
ENABLE
button.
When the protocol is enabled, the router's parameters configured automatically are displayed on the
page:
Parameter
Description
Protocol
A protocol for network packet transmission.
IP address
The IP address of a client from the local area network.
Private port
A port of a client's IP address to which traffic is directed from a
public port of the router.
Public port
A public port of the router from which traffic is directed to a client's
IP address.
Description
Information transmitted by a client's network application.
Page
182
of 236
