DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Gateway IP address
Available if the
Access point
,
Repeater
, or
Client
mode was
selected the Initial Configuration Wizard.
The gateway IPv4 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server).
Optional
.
Hostname
The name of the device assigned to its IP address in the local subnet.
Figure 89. Configuring the local interface. The
IPv4
tab. The
Dynamic IP Addresses
section.
Parameter
Description
Dynamic IP Addresses
Mode of dynamic IP
address assignment
An operating mode of the router's DHCP server.
•
Disable
: The router's DHCP server is disabled, clients' IP
addresses are assigned manually.
•
DHCP server
: The router assigns IP addresses to clients
automatically in accordance with the specified parameters.
When this value is selected, the
Start IP
,
End IP
,
Lease
time
fields and the
DNS relay
switch are displayed on the
tab. Also when this value is selected, the
DHCP Options
and
Static IP Addresses
sections are displayed on the tab.
•
DHCP relay
: An external DHCP server is used to assign IP
addresses to clients. When this value is selected, the
External DHCP server IP
and
Option 82 Remote ID
fields are displayed on the tab.
Available if the
Router
,
WISP Repeater
, or
3G/LTE modem
mode was selected
in the Initial Configuration Wizard.
Page
110
of 236
