DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Creating LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct
operation of the mobile WAN connection click the
ENTER
button in the notification in the top
right corner of the page and enter the PIN code
10
on the page displayed. Then on the connection
creation page, in the
General Settings
section, select the relevant value from the
Connection
type
drop-down list and specify the needed values.
Figure 85. The page for creating a new
LTE
connection. The
General Settings
section.
Parameter
Description
General Settings
Interface
A physical or virtual WAN interface to which the new connection
will be assigned.
Connection name
A name for the connection for easier identification.
Enable connection
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
10 Some models of USB modems do not support disabling the PIN code check on the SIM card through the web-based
interface of the router.
Page
106
of 236
