DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
DNS
On the
Advanced / DNS
page, you can add DNS servers to the system.
Figure 135. The
Advanced / DNS
page.
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
You can specify the addresses of DNS servers manually on this page or configure the router to
obtain DNS servers addresses automatically from your ISP upon installing a connection.
!
When you use the built-in DHCP server, the network parameters (including DNS servers)
are distributed to clients automatically.
Specify needed settings for IPv4 in the
DNS IPv4
section and for IPv6 in the
DNS IPv6
section.
If you want to configure automatic obtainment of DNS servers addresses, move the
Manual
switch
to the left. Then move the
Default gateway
switch to the left and from the
Interface
drop-down
list select a WAN connection which will be used to obtain addresses of DNS servers automatically.
If you want the router to use the default WAN connection to obtain addresses of DNS servers, move
the
Default gateway
switch to the right. Then click the
APPLY
button.
Page
169
of 236
