D-Link DIR-620S Page 149 User Manual Download

Page: 149 / 236

DIR-620S

Wireless N300 Router with 3G/LTE Support and

USB Port

User Manual

Configuring via Web-based Interface

Samba

On the

USB Storage / Samba

page, you can enable the built-in Samba server of the router to

provide access to the USB storage for users of your LAN.

Figure 118. The

USB Storage / Samba

page.

To enable the Samba server, move the

Enable Samba server

switch to the right.

The

Anonymous login

switch (by default, the switch is moved to the right) allows anonymous

access to the content of the USB storage for users of your LAN.

If you want to provide authorized access to the content of the USB storage for users of your LAN,
move the switch to the left. After applying the parameters on this page, go to the

USB Storage /

USB Users

page and create needed accounts.

In the

Work group

field, leave the value specified by default (

WORKGROUP

) or specify a new

name of a workgroup which participants will have access to the content of the USB storage.

In the

Short description

field, you can specify an additional description for the USB storage.

This value will be displayed in some operating systems. Use digits and/or Latin characters.

In the

NetBIOS

field, specify a name of the USB storage which will be displayed for users of your

LAN. Use digits and/or Latin characters.

Page

149

of 236

Summary of Contents for DIR-620S













































































































































































































































Search results

Summary of Contents for DIR-620S

Reviews:

Related manuals for DIR-620S

Brands by name

Popular brands

D-Link DIR-620S, User Manual

Search results

Summary of Contents for DIR-620S

Reviews:

Related manuals for DIR-620S

Brands by name

Popular brands