DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Installation and Connection
The
Device Information
section displays the model and hardware version of the router, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the
Device mode
line. In the opened window, click the
Initial Configuration Wizard
link (for the detailed
description of the Wizard, see the
Initial Configuration Wizard
section, page 44).
If needed, you can disable the LEDs of the device (except the
POWER
LED). To do this, move the
Enable LEDs
switch to the left. In order to enable the LEDs, move the switch to the right and
reboot the device.
The
Wi-Fi 2.4 GHz
section displays data on the state of the device's wireless network, its name and
the authentication type, and availability of an additional wireless network.
In the
WAN
section, data on the type and status of the existing WAN connection are displayed.
In the
LAN
section, the IPv4 and IPv6 address of the router, the LAN MAC address, and the
number of wired and wireless clients of the device are displayed.
The
LAN Ports
section displays the state of the device's LAN ports and data transfer mode of
active ports.
The
USB Devices
section displays the device connected to the USB port of the router.
The
Yandex.DNS
section displays the Yandex.DNS service state and operation mode. To enable
the Yandex.DNS service, move the
Enable
switch to the right. If needed, change the operation
mode of the service.
Page
40
of 236
