DIR-620S
Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Figure 65. The
Connections Setup / WAN
page. The advanced mode.
To create a new connection, click the
ADD
button (
) in the
Connections List
section. Upon
that the connection creation page opens.
To edit an existing connection, in the
Connections List
section, left-click the relevant line in the
table. On the opened page, сhange the needed parameters and click the
APPLY
button.
To disconnect a connection and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
RECONNECT
button.
To remove a connection, in the
Connections List
section, select the checkbox located to the left
of the relevant line in the table and click the
DELETE
button (
).
To allow multicast traffic (e.g. streaming video) for a connection, click the
IGMP
link (for the
description of the page, see the
IGMP
section, page 185).
To use one of existing WAN connections as the default IPv4 or IPv6 connection, in the
Default
Gateway
section, select the choice of the radio button which corresponds to this connection.
To return to the simplified mode, click the
SIMPLIFIED MODE
button (the button is unavailable if
several WAN connections are created).
Page
77
of 236
