DGS-3312SR Layer 3 Gigabit Switch
58
To display the errors of the port 3 of module 1:
DGS-3312SR:4#show errors port 1:3
Command : show errors port 1:3
Port number 1:3
Error Type RX Frames Error Type TX Frames
--------------- --------------- ---------------------------- ----------------
CRC Error 19
Excessive Deferral 0
Undersize 0
CRC Error
0
Oversize 0
Late Collision 0
Fragment 0
Excessive Collision 0
Jabber 11
Single Collision 0
Drop Pkts 20837 Collision
0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose
Used to display real-time port and cpu utilization statistics.
Syntax
show utilization
[cpu | unit_id <int>]
Description
This command will display the real-time port and cpu utilization
statistics for the switch.
Parameters
cpu
– Entering this parameter will display the current cpu
utilization of the switch, as a percentage.
unit_id <int>
- Entering this parameter, along with the appropriate
switch number, will display the current utilization of all ports on the
switch of a switch stack.
Restrictions None.
Example usage:
To display the port utilization statistics:
DGS-3312SR:4#show utilization unit_id 1
Command: show utilization unit_id 1
Port TX/sec RX/sec Util Port TX/sec RX/sec Util
---- ---------- ---------- ---- ---- ---------- ---------- ----
1:1 0 0 0
1:2 0 0 0
1:3 0 0 0
1:4 0 0 0
1:5 0 0 0
1:6 0 0 0
1:7 0 0 0
1:8 0 0 0
1:9 0 0 0
1:10 0 0 0
1:11 0 0 0
1:12 0 0 0
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
