DGS-3312SR Layer 3 Gigabit Switch
277
To configure all of the OSPF interfaces on the switch with a single group of parameters:
DGS-3312SR:4#config ospf all state enable
Command: config ospf all state enable
Success.
DGS-3312SR:4#
show ospf ipif
Purpose
Used to display the current OSPF interface settings for the
specified interface name.
Syntax
show ospf ipif {<ipif_name 12> | all}
Description
This command will display the current OSPF interface settings for
the specified interface name.
Parameters
<ipif_name 12>
−
The IP interface name for which you want to
display the current OSPF interface settings.
all –
Entering this parameter will display all ospf Interface settings.
Restrictions None.
Usage Example
To display the current OSPF interface settings, for a specific OSPF interface:
DGS-3312SR:4#show ospf ipif ipif2
Command: show ospf ipif ipif2
Interface Name: ipif2 IP Address: 123.234.12.34/24 ((Link Up)
Network Medium Type: BROADCAST Metric: 1
Area ID: 1.0.0.0 Administrative State: Enabled
Priority: 1 DR State: DR
DR Address: 123.234.12.34 Backup DR Address: None
Hello Interval: 10 Dead Interval: 40
Transmit Delay: 1 Retransmit Time: 5
Authentication: None
Total Entries: 1
DGS-3312SR:4#
Usage Example:
To display the current OSPF interface settings, for all OSPF interfaces on the switch:
DGS-3312SR:4#show ospf all
Command: show ospf all
Interface Name: System IP Address: 10.42.73.10/8 (Link Up)
Network Medium Type: BROADCAST Metric: 1
Area ID: 0.0.0.0 Administrative State: Enabled
Priority: 1 DR State: DR
DR Address: 10.42.73.10 Backup DR Address: None
Hello Interval: 10 Dead Interval: 40
Transmit Delay: 1 Retransmit Time: 5
Authentication: None
