DGS-3312SR Layer 3 Gigabit Switch
107
config gvrp
state [enable | disable]
−
Enables or disables GVRP for the ports
specified in the port list.
ingress_checking [enable | disable]
−
Enables or disables ingress
checking for the specified port list.
acceptable_frame [tagged_only | admit_all]
– This parameter
states the frame type that will be accepted by the switch for this
function.
tagged_only
implies that only VLAN tagged frames will
be accepted, while
admit_all
implies tagged and untagged frames
will be accepted by the switch.
pvid <vlanid 1-4094>
– Specifies the default VLAN associated with
the port.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To set the ingress checking status, the sending and receiving GVRP information :
DGS-3312SR:4#config gvrp 1:1-1:4 state enable ingress_checking
enable acceptable_frame tagged_only pvid 2
Command: config gvrp 1:1-1:4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success.
DGS-3312SR:4#
enable gvrp
Purpose
Used to enable GVRP on the switch.
Syntax
enable gvrp
Description
This command, along with
disable gvrp
below, is used to enable
and disable GVRP on the switch, without changing the GVRP
configuration on the switch.
Parameters None.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To enable the generic VLAN Registration Protocol (GVRP):
