DGS-3312SR Layer 3 Gigabit Switch
184
config radius delete
Purpose
Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Description
The
config radius delete
command is used to delete a previously
entered RADIUS server configuration.
Parameters
<server_index 1-3>
−
A number identifying the current set of
RADIUS server settings the user wishes to delete. Up to 3 groups
of RADIUS server settings can be entered on the switch.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To delete previously configured RADIUS server communication settings:
DGS-3312SR:4#config radius delete 1
Command: config radius delete 1
Success.
DGS-3312SR:4#
config radius
Purpose
Used to configure the switch’s RADIUS settings.
Syntax
config radius <server_index 1-3> {ipaddress <server_ip> | key
<passwd 32> | auth_port <udp_port_number 1-65535> |
acct_port <udp_port_number 1-65535>}
Description
The
config radius
command is used to configure the switch’s
RADIUS settings.
Parameters
<server_index 1-3>
−
Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server
settings can be entered on the switch.
ipaddress <server_ip>
−
The IP address of the RADIUS server.
key
−
Specifies that a password and encryption key will be used
between the switch and the RADIUS server.
<passwd 32>
−
The shared-secret key used by the
RADIUS server and the switch. Up to 32 characters can be
used.
auth_port <udp_port_number>
−
The UDP port number for
authentication requests. The default is 1812.
acct_port <udp_port_number>
−
The UDP port number for
accounting requests. The default is 1813.
Restrictions Only
administrator-level users can issue this command.
