DGS-3312SR Layer 3 Gigabit Switch
95
Example usage:
To show 802.1p user priority:
DGS-3312SR:4# show 802.1p user_priority
Command: show 802.1p user_priority
QOS Class of Traffic
Priority-0 -> <Class-2>
Priority-1 -> <Class-0>
Priority-2 -> <Class-1>
Priority-3 -> <Class-3>
Priority-4 -> <Class-4>
Priority-5 -> <Class-5>
Priority-6 -> <Class-6>
Priority-7 -> <Class-7>
DGS-3312SR:4#
config 802.1p default_priority
Purpose
Used to specify default priority settings on the switch. Untagged
packets that are received by the switch will be assigned a priority
tag in its priority field using this command.
Syntax
config 802.1p default_priority [<portlist> | all] <priority 0-7>
Description
The
config 802.1p default_priority
command allows you to
specify the 802.1p priority value an untagged, incoming packet will
be assigned before being forwarded to its destination.
Parameters
<portlist>
−
Specifies a range of ports to be configured. The port
list is specified by listing the lowest switch number and the
beginning port number on that switch, separated by a colon. Then
the highest switch number, and the highest port number of the
range (also separated by a colon) are specified. The beginning
and end of the port list range are separated by a dash. For
example, 1:3 specifies switch number 1, port 3. 2:4 specifies
switch number 2, port 4. 1:3-2:4 specifies all of the ports between
switch 1, port 3 and switch 2, port 4
−
in numerical order.
all
−
Specifies that the
config 802.1p default_priority
command
will be applied to all ports on the switch.
<priority 0-7>
−
Specifies the 802.1p priority tag that an untagged,
incoming packet will be given before being forwarded to its
destination.
Restrictions Only
administrator-level users can issue this command.
Example usage:
To configure 802.1p default priority on the switch:
DGS-3312SR:4#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
DGS-3312SR:4#
